GeoJSON to Litchi Waypoint Mission Converter Instructions

Instructions

In page one of GeoJson to Litchi Waypoint Mission:
1. Select the desired units to be stored in the Litchi CSV file.
2. Select the desired path mode.
3. Choose whether or not the heights should be above ground.
4. Select the desired heading offset from follow wayline.
5. Select the mission height. This value will be used for all waypoints.
6. Select the gimbal pitch angle. This value will be used for all waypoints.
7. Use the file chooser to upload your GeoJSON file.
8. Generate the mission and review the resulting parameters.

In page two of GeoJSON to Litchi Waypoint Mission:
1. Review the parameters and calculations.
2. Download the CSV file.
In the Litchi Mission Hub:
1. Use the Missions menu to import the CSV file created by GeoJSON to Litchi Converter.
2. In "Settings" make sure that the "Heading Mode" is set to "Custom(WD)".
3. Adjust the Litchi mission parameters (such as speed) as desired
4. Go fly!

GeoJSON to Litchi Conversion

This web application can be used to convert a GeoJSON file into a Litchi waypoint mission. GeoJSON files are written in XML and are commonly used with Garmin devices. A GeoJSON file may contain three primary types of information:

Waypoints (converted to a Litchi waypoint mission)
Routes (ignored)
Tracks (converted to a Litchi waypoint mission)
- Note: If both waypoints and tracks are present, tracks are used in the conversion.

Track segments typically containing GPS coordinates and elevations. The elevation data may or may not represent ground level MSL elevation data. If the "Above Ground" option is checked below, the specified height will be added to the difference between the elevation of the current waypoint minus the elevation of waypoint 1. In some cases, this will simulate the "Above Ground" option found in Litchi's Mission Hub.